Properly Using A Foot Peg Tie Down System

Services

Properly Using A Foot Peg Tie Down System

When using bike rack systems, the common problem is that one of the main components, foot peg tie down, may fall off. This can be a very frustrating and dangerous situation because if the tie-down fails, you cannot secure your bike and risk riding it off the rack. This article intends to discuss how best to secure the bike with footpegs. Bear in mind that although there are several standard methods for securing a bike with footpegs, none of these is foolproof.

The common method for securing a bike with foot peg tie downs is the standard mechanical crank locking mechanism. This is achieved by cranking the handlebar away from the footpeg, which effectively locks the footpegs into position. This is a slow and often inaccurate way of securing your bike and can quickly fail if your bike is not strong enough or has not correctly set up the system.

One way of securing your bike with footpeg tie downs is to use an aftermarket footpeg which offers more reliable results. These are often made of a more robust material than the stock ones and work much better. In addition, they are more difficult to remove and install. However, bear in mind that replacing it can be more costly if your footpeg breaks, as the original may no longer be compatible.

Another standard method for securing your bike is to use an aftermarket foot peg clamp. Although the clamp works just as well as the stock ones, it is more expensive and can also be challenging to remove if your foot peg breaks. Some clamps are made to not slip down on the foot peg, which makes them more secure. This can be a more expensive way of securing your bike.

To avoid losing your foot peg completely, you should make sure you purchase a clamp that attaches securely to both sides of the foot peg. These are often sold as part of a kit. If your bike has a rear suspension system, you will need to get a clamp that attaches to the side of the rear suspension. This is best if you have a very rigid foot peg and you want to ensure it does not slip or break easily. However, it may be more challenging to remove the clamps if you have a regular suspension system.

A good quality foot peg tie-down should include the following features: locking mechanism, anti-static action, anti-bacterial action, and smooth surface. The locking mechanism keeps the foot peg firmly in place until you release it. The anti-static action allows it to remain in position even when there is friction between two surfaces. The antibacterial action helps eliminate bacteria and dirt from building up on the clamps over time. Finally, the smooth surface will prevent it from becoming scratched or torn during rough use.

Leave a Reply

Your email address will not be published. Required fields are marked *